Longmont's fence permit rule covers nearly every job. The city's fence guide says replacement fences require permits no matter the amount of fence being replaced. Even swapping a worn fence for the same material, in the same place, at the same height needs one.
The city is in Boulder County, with its eastern edge in Weld County, about 34 miles north of Denver. For Regal Fencing that makes Longmont the far end of the map. Our office is at 3778 S Walden St in Aurora, and Longmont is the farthest north our crews travel.
We still come up for a free on-site estimate. Jackson Vann, the owner and estimator, measures the yard and usually sends the written price the same day. Have your lot's improvement location certificate ready if you can, because the permit application needs it.
How does Longmont weather treat a fence?
Longmont sits at about 4,981 feet, with St. Vrain Creek running just south of the city center. Strong wind is on record here: the NOAA Physical Sciences Laboratory's list of Boulder area wind events shows a 66 mph gust in Longmont on December 15, 2021, and 64 mph at Vance Brand Airport on April 6, 2023. The city's guide sets post depth at a minimum of 24 inches, and you can ask about our free steel posts if your yard is exposed.
What do Longmont fence jobs usually involve?
- 6 ft cedar privacy fences for side and rear yards, with posts set to the city's guide.
- Front yard fences at 42 inches or under and at least 50 percent open, such as spaced picket and ornamental metal.
- Replacing old fences, with the fence dimensions the permit application asks for.
- Corner lot fences set 1 foot back from the sidewalk, with gates that open into the yard.
- Vinyl, composite, steel, aluminum and wrought iron fences.
- Split rail, 3-rail ranch and hog wire fences.
- Repairs and fence staining.
Do you need a permit for a fence in Longmont?
Yes, for nearly every fence job. The city's fence guide requires a permit for a new fence, for changing one fence type to another, for moving a fence and for replacing a deteriorated fence with the same material at the same location and height.
The one exception it names is a privacy screen that is not on a property line, such as one around a patio, as long as it is not structural.
To apply, you submit the permit application and an improvement location certificate (ILC) of your lot showing the setbacks and the fence location. For a replacement, the guide says a detailed plot plan may be accepted case by case. Permits are issued by Building Services at 385 Kimbark Street, (303) 651-8332.
A final inspection is required when the work is done. The city says you do not need to be present for a fence inspection.
How tall can a fence be in Longmont?
6 feet on residential property, under section 15.05.100 of the Longmont Land Development Code. Other properties can go to 8 feet.
Front yards are stricter. A fence between the front lot line and the front of the house can't exceed 42 inches and must be at least 50 percent transparent. Chain link and other woven wire fences are prohibited in residential front yards.
The finished, smooth side has to face the public right-of-way, common open space or other public areas.
What are Longmont's rules for corner lots?
A privacy fence is allowed along the street side of a corner lot's side and rear yard, with conditions. It must sit outside the right-of-way and at least 1 foot back from any sidewalk along the street, and its gates must open toward the yard.
Then there is the sight distance triangle. It runs 30 feet along each curb where two streets meet, or where a street meets an alley, and 15 feet where a driveway meets a street.
Inside that triangle, nothing less than 50 percent open can rise above 36 inches. A fence that is at least 50 percent open can reach 42 inches.
How does Longmont want fence posts set?
The city's guide is specific. Posts go in concrete or earth at least 24 inches deep, no more than 8 feet apart, and they are 4 by 4 inches or larger.
Any wood touching concrete or soil should be pressure treated or naturally resistant to decay. The guide suggests redwood, cedar or pressure treated lumber, and Regal's wood fences are cedar.
What does Regal do before digging in Longmont?
We request the Colorado 811 utility locate. State law requires at least 2 business days' notice, Colorado 811 asks for 3, and Longmont's guide says to allow 3 to 5 working days for the lines to be marked.
Most installs then take 1 to 2 days. If we damage a sprinkler line during the install, we fix it for free.
